Zinsser® Bulls Eye 1-2-3 Water-Base Primer, Interior/Exterior, Flat White, 1 gal Bucket/Pail, 4/Carton ; Non-Stock Item - Extended Delivery Time

Zinsser® Bulls Eye 1-2-3 Water-Base Primer, Interior/Exterior, Flat White, 1 gal Bucket/Pail, 4/Carton ; Non-Stock Item - Extended Delivery Time

Item # RST2001CT

  • Flexible, low-odor, water-based-acrylic primer-sealer.
  • Consistently provides outstanding performance indoors and out.
  • Excellent adhesion qualities with great flow and leveling properties.
  • Seals in stains, graffiti and tannin bleed.
  • Provides an excellent mold- and mildew-resistant barrier.
  • Inhibits rust—ideal for new metal.
  • Compatible with all topcoat products.
Manufacturers Item #2001CT

Featuring a very flexible, low-odor, water-based-acrylic formula, Bulls Eye 1-2-3® Water-Base Primer consistently provides outstanding performance indoors and out. As it possesses excellent adhesion qualities as well as great flow and leveling properties, you can apply it to most interior and exterior surfaces with minimal to no sanding. Once applied, it seals in stains, graffiti and tannin bleed while simultaneously performing as an excellent mold- and mildew-resistant barrier. Its rust-inhibitor qualities also make it ideal for most metals. Compatible with all topcoat products.

Paint Sub-Category: Primer; Water-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.

  • Global Product Type Building/Construction Paints & Primers
  • Paint Sub-Category Primer; Water-Based
  • Intended Application Environment Interior/Exterior
  • Finish/Sheen Flat
  • Color(s) White
  • Color Family White
  • Number of Colors 1
  • Volume Capacity 1 gal
  • Packaging Type Bucket/Pail
  • Binder/Vehicle Ingredient(s) Styrenated Acrylic
  • Diluent/Solvent Ingredient(s) Glycol Ethers; Water
  • Pigment/Dye/Filler Ingredient(s) Titanium Dioxide
  • Application Method Brush; Pneumatic Spray; Roller
  • Recommended Level of Ventilation Moderate
  • Application Temperature Range 35° to 90° F
  • Applicable Surface Material Cement/Concrete; Drywall; Glass/Ceramics; Masonry; Metal; Paper Products; Plaster; Wood
  • Maximum Coverage Area 350 sq ft (Porous Surfaces); 450 sq ft (Nonporous Surfaces)
  • Cure/Dry-Time Range 30 min (Touch); 1 h (Top Coat); 2 to 24 h (Stain Sealing); 7 days (Full Hardness)
  • Age Recommendation Ages 16 and Up
  • Product Biodegradability Indicator N
  • Product Biodegradability in Days 0
  • Product Compostability Indicator N
  • Pre-Consumer Recycled Content Percent 0%
  • Post-Consumer Recycled Content Percent 0%
  • Total Recycled Content Percent 0%
  • Disclaimer Statement For best results, apply within the recommended Application Temperature Range (35° to 90° F) when relative humidity is not greater than 85%. Though minimal surface prep is required, intended surfaces should be clean, dry, sound and free of dust, dirt, grease, oil, wax, mildew, wallpaper or adhesive. Not recommended for floors, decks or surfaces subjected to full-immersion and/or prolonged contact with water.
  • Footnote 1 Recommended Dry Film Thickness (DFT) Per Coat: 1 to 2 mil
  • Footnote 2 Recommended Wet Film Thickness to Achieve DFT: 3 to 6 mil
  • Country of Origin US
  • Carton Pack Quantity 4
  • Pack Quantity 0
  • UPC 047719020011
  • UNSPSC 31211509
Write 
/ 5
Reviews
of